Aspid GT-21 Invictus

Jul 19, 2012
Author:
Photos: Aspid Cars
0 Share


Aspid Cars has released the first images of its new GT-21 Invictus, which features a semi open wheel appearance at the front of the car.

“The GT-21 Invictus complements the Aspid Super Sport, but is bigger and more powerful,” says the car’s chief designer and company founder Ignacio Fernandez Rodriquez.  “It has been a challenging styling exercise, but fortunately we have a really talented design team in the company.  They have done an excellent job evoking the values of the company in the car.”

“Aspid Cars in the vanguard of technological and lightweight vehicle development and we needed to convey this in the design. We also needed an element of aggressiveness to reveal our motor sport credentials. The design brief also demanded that we portray the elegance and beauty required for a premium car.”

The Aspid GT-21 Invictus is bigger and less compromised for interior space compared with the Aspid Super Sport, significantly increasing the level of comfort for the driver and passengers.   It is more powerful and more technologically advanced thereby maintaining the company’s reputation for designing cars with a phenomenal power-to-weight ratio, significant CO2  reducing capability through lightweight efficiency, combined with sublime road handling.  The GT-21 employs the same chassis design that weighs a mere 80 kg in the Super Sport, which still sets an industry benchmark.  The GT-21 Invictus styling has been undertaken by IFR Automotive, which is also responsible of the design and engineering of the Aspid Super Sport which preceded it.


“The Aspid GT-21 Invictus represents a new generation of Gran Turismo fit for the 21st century” says Fernandez. “With a weight that is less than 990kg when dry, the car features the latest generation BMW V8 engine capable of delivering 450 horsepower.  It also incorporates a new generation of sports car hybridization, which increases the dynamic performance of the vehicle while being respectful of the environment.  A lot of the technology we’ve developed will transfer to other road vehicles”

The Aspid GT-21 Invictus will offer the same astonishing acceleration as the Super Sport, reaching 100km/h (62mph) in less than three seconds, but with a higher maximum speed exceeding 300km/h (187mph) and a cornering ability in terms of g forces that similarly sets a new class benchmark.  High speed stability and performance is enhanced through efficient aerodynamics. The dimensions are those of a GT: 4.447mm long, 1,883mm wide and a height of 1,226mm. The Invictus is aimed squarely at the premium sports car market and production will be limited to 250 a year to retain its exclusivity.

The manufacturing processes and suppliers for the Aspid GT-21, being from aerospace and motorsport industries, are used to producing components at high levels of precision in small batches or even as unique parts.  The materials employed include aerospace grade aluminium, ultra-light high-strength steels, and composites.  The unique design of the car, choice of materials and manufacturing process ensure that every Aspid can be tailored to each individual customer.

Says Fernandez:  “Each car will be custom made and hand built in its own production bay.  There is no production line as such.  Each client can choose more than 100 different options, and most customers will want to visit the factory during the build of their personalised car.”

Each car will be handed over to the customer at the factory by the team of engineers and technicians who build it. Each customer will also receive a special book signed by the factory team illustrating the assembly sequence.

Customers will be able to purchase the car from an elite group of 20 dealers across Europe, some of which have yet to be selected, able to deliver the high standard of sales and aftersales service.  As well as maintaining the vehicle the dealer network will also help organise Aspid branded events and entertainment.

The configuration of each car will be tailored to suit the precise requirements of each customer, giving them the option, for example, to adapt the geometry and the electronics to their individual needs and personal taste. The customer may at any time request the Aspid engineering department to change the car’s geometry and electronic settings for different needs.

“The GT-21 Invictus is a significant step forward for the Aspid brand,” adds Fernandez. “We’re building on our experience of developing a high performance road and race car and technology demonstrator, which has helped us to establish IFR Automotive as an engineering consultancy. We have invested significantly in developing the technology and understanding the market for our new and exclusive road car. The GT is longer than the Super Sport by 700 mm and oriented towards a radical sports car segment of the market requiring larger dimensions, an 8-cylinder engine, and dual-clutch transmission actuated by F1-style shift paddles on the steering wheel, which is also significantly easier to get in and out of the car.  It also has more space inside the cabin and luggage compartment.”

Fernandez says the Invictus represents the first GT "semi open wheeler" with a 2+2 passenger configuration and rear-wheel drive: “It has a strong visual element to help identify the Aspid open-wheel design language, where you can see all the beauty and technological excellence used in the wheel in conjunction with the suspension arms and their oval shape, dual brake callipers and their unique double discs, complemented by the front wings which also make a smart and aggressive statement of our intentions.”

“The GT-21 brings together the most advanced technologies yet introduced to this market as presented previously in the Super Sport, which helped us test the water.  It introduces a compendium of new technologies specifically developed for this new model, which enhances our understanding of cars generally and their continual evolution as machines of even greater efficiency than we’ve ever seen before.”
  0 comments
Only registered users able to leave a comments.
Please, sign in or create an account

Last articles

Oct 04, 2013
The third annual international conference on automotive design AutoDesign Prague was held at the end of September, again...
Jun 28, 2013
… and not one!
Jun 17, 2013
For the first time creators of Milanese automotive style gathered in one place for the world only “roaring conference“.
Jun 03, 2013
Autodesk Company, the developer of such software products, as Alias Autostudio and 3ds Max, has announced the start of t...
Follow Cardesign on Facebook Follow Cardesign on Twitter Cardesign Community Rss